B-TEK Scales WorldWEIGH C100 Series, Technical Manual

Page: 7 / 30

C100 Series Technical Manual
- 4 -
SETUP
Local Scale:
Note: Battery should be charged for 12 hours prior to first use.

Place the scale on a table.

Place the stainless platter into the locating holes on the top cover.

Do not press with excessive force as this could damage the load cell
inside.

Check the water mark. If, bubble is not centered adjust the leveling feet
until centered. Check the level when you change the location.

Attach the power supply cable to the connector on the bottom right side of
the scale base. Plug in the power supply.

Turn on the Scale. The power switch is located at the right side of the
scale base.

The scale will show the model number in the “ Weight ” display and will
start self test countdown.