B-TEK Scales WorldWEIGH C100 Series, Technical Manual

Page: 14 / 30

C100 Series Technical Manual
- 11 -
The average piece weight can be increased at any time during the counting
process, by entering the displayed number of items and confirming by
pressing
.
Weighing a sample to determine the Unit Weight

Reset the balance to zero or tare the empty container if necessary.

Place the known quantity of items on the scale, wait few seconds for
display stable.

Enter the number of quantity by using numeric keys. Exp: 15

Enter the key to confirm. The scale determines the average parts
weight.

As more items are added to the scale, the weight and the count will
increase.

If the scale is not stable, the calculation will not be completed.

If the weight is below zero, “ Count ” display will show negative count.
Enter a known Unit Weight
If an a known unit weight, it can enter by using the numeric keys.

Enter the value of unit weight by numeric keys.

Press during the unit display flashing.

If in the weight display as “kg” unit is active, the average piece weight
will be displayed in “g”. If as “lb” is active, the average piece weight will
be displayed in “lb”.
Automatic Update of Unit Weight

The scale can automatically update the unit weight, when a sample
less than the initial sample count are added.

A beep will be heard when the value has updated.

By pressing key, can be blocked unit weight and auto update
0 1 .5 00 15
10 1 .5 00 0 .15