B-TEK Scales WorldWEIGH C100 Series, Technical Manual

Page: 15 / 30

C100 Series Technical Manual
- 12 -
Check Weighing or Count Pre-set
Check weighing is a procedure to cause an alarm to sound when the weight
or piece quantity within the a limits. Limits can be set by using numeric keys.
Setting the Checking Limits
Press key, the active mode will be shown
Press key to select counting
Press key, the active high count limit will be shown
Use numeric key to enter desired and if necessary press to clear.
Press key, the active low count limit will be shown
Use numeric key to enter desired and if necessary press to clear.
Press key to return weighing mode.

For check limits, just one limit value can set

If both values are deleted, the check mode is deactivated.

The beep sound will be worked as described in the beep parameter
f1 off
,
beep
Pst net
Pst cnt
Hi cmt 1 500
lo cmt 500