B-TEK Scales WorldWEIGH C100 Series, Technical Manual

Page: 13 / 30

C100 Series Technical Manual
- 10 -
Display of Saved Data
To check the total value saved, press key when the display is in
zero. Total weight will be displayed two seconds.
Delete Saved Data
To clear the memory, press the display will be shown saved data.
Press during the display, delete all saved accumulation data.
Automatic Accumulation
Weighing values automatically accumulate total, when the scale is
unloaded and with out pressing a key
Set the parameter
F1 off
–
print
–
au on

Place the item to be weighed on the platform

Wait few seconds for display stability and a control beep.

Unload the item from the platform, the weighing value is added into
the memory

The scale must return to come zero or negative number before
adding another samples.

99 entries can be stored or until the capacity of the weight display is
exceeded.
6. Parts Counting
In order to do parts counting, it is necessary to know the average weight of
the items to be counted. This can be done either by weighing a known
number of the items and letting the scale determine the average unit
weight or by manually inputting a known unit weight using the keypad.
To count a greater number of parts the average weight per part has to be
determined with a small quantity.
0 1 .5 00 - 1-
1 .5 00 0 0
0 - 3 - 1 .5 00
0 - 0 - 0 00