B-TEK Scales WorldWEIGH C100 Series, Technical Manual

Page: 21 / 30

C100 Series Technical Manual
- 18 -
8. CALIBRATION
Note: Capacity and division size for local base can NOT be changed

Turn on the scale and press during the self test.

Use the numeric key to enter the password
Default password
0000
Press to confirm

Display will be show
Select Local or Remote scale by pressing
Press to confirm.

Display will be show
If necessary, press to select the weighing unit kg or lb.
Press to confirm.

Display will be show
Ensure the platform is empty and wait for stable indicator.
Press
to confirm.

Display will be show
Set weight value will be required
Enter the value by using numeric keys
Press to confirm.

Display will be show
Place the calibration weight on the platform and
wait few seconds for display to be stable.
Press
to confirm.

After the calibration the scale will start a self test, remove the weight
during that time and display will return to weighing mode.

If display shows any error message or incorrect measurement, repeat the
calibration process again.
Pi n
Pi n - - - -
tech Local
remote
tech unit
unload
Load
sel 000000
000005