B.S. Service PI 58 L C E2 T, Operating Instructions Manual

Page: 28 / 68

- If after about 10 seconds no operation is carried out,
display shade goes back to the initial one. The hob will
continue its normal cooking.
- If the power level is set at zero, the cooking zone will
shut off.
- To turn off the cooking zone , select the
corresponding “ C ” key and switch the cooking level
to 0 .
- The display will view the corresponding numbers; the
grading of the concerned zone will be intense while
the others will be weaker.
- All operations will be combined with a “BEEP” acoustic
signal.
- When a cooking zone “ C ” is brought to the OFF
position and the glass top temperature is greater than
approximately 50°, the display of the interested zone
will signal a fixed “ H ”.
Warning:
To prevent damage being inflicted on the electronic
circuits, the hob is fitted with an overheating safety
system.In situations where the appliance is used at
high power levels for a prolonged period of time, the
hob may switchoff one or more of the activated zones
temporarily, until the temperatures return to the set
levels.On the display corresponding to the cooking
zone which has been temporarily switched off, the
power level will be shown in alternation with a E/2 .
This will stop flashing once the cooking zone has
beenreactivated.
• Key function:
To keep children or persons needing supervision
from using the hob surface, all of the functions can
be blocked in the following way:
1- Switch to hob on (if it is off) by selecting the “ ON/
OFF ” key. The cooking zones must be off.
2- Press the “ - ” key and the R4 (Fig.5) key
simultaneously.
3- Press only the cooking zone R4 (Fig.5) key once
again.
The “ L ” letter indicating that the function is active will
appear on the display.
Should one or more zones still be hot, the letter “ H ”
and “ L ” will alternate on the relative displays.
- To deactivate the key function , switch the hob
off (if it is on) by selecting the “ ON/OFF ” key.
- Once it is off, switch the hob back on.
- Press the “ - ” key and the R4 (Fig.5) key
simultaneously.
- Press the“ - ” key a second time.
- Zeros will appear on all the displays for a few
seconds.
- If the cooker top is switched off with the KEY function
active, when subsequently activated the top will be
in the same situation, meaning with the KEY function
active.
- If the hob is switched on and the Lock function is
enabled, button ON/OFF will still work.
• Magnetic sensor:
- The hob is equipped with a pan sensor; when the
pan is removed or badly positioned, the symbol will
appear.
If, on the other hand, the surface of the glass is still
hot, the symbol will appear alternating with the .
• O.S.D. (Overflow Safety Device):
The hob is equipped with a safety system which
moves all hotplates to the OFF position and activates
the safety lock when liquids or items are detected on
the control panel.
These symbols will flash on the display: .
They can be deactivated by removing the item or the
liquid. The hob will switch off automatically.
• Timer:
Note: the Timer can be activated on all the cooking
zones simultaneously.
This function allows to establish the time (from 1 to
99 minutes) or automatic switch-off of the cooking
zone selected.
Activation:
1- Select the cooking zone “ C ”.
2- Set the cooking level.
3- Press the “ + ” and “ - ” keys simultaneously. The
decimal point “ • ” will start to flash. The time on the
timer will appear on the relative displays.
4- Adjust the time within about 10 seconds by
using the “ + ” and “ - ” keys. By pressing the “ - ” key
directly the time will be set at 30 minutes.
- If the decimal point “ • ” appears on the displays, it
means that timer is active.
- During cooking the time set previously with the
timer is not displayed.
- In order to view the time remaining on the Timer
of a cooking zone, select that cooking zone and
then press the “ + ” and “ - ” keys simultaneously. On
the “ B1 ” and “ B2 ” displays the remaining time will
appear.
- When time is up an acoustic signal beeps and the
timer displays flash. Any key can be selected to stop
the acoustic signal. If you leave the acoustic signal
it will deactivate after about 2 minutes.
To deactivate the timer function before the set
time , select the cooking zone and then press the “ + ”
and “ - ” keys simultaneously. By selecting the “ - ” key a
second time the time goes to 0 . After that the cooking
zone will continue its standard function.
• Minute Minder (Countdown):
This function can be used both with cooking zones
activated/deactivated and with the timer inserted.
- The Minute Minder allows to set an established
countdown that goes from 1 to 99 minutes.
On expiry of the time, the hob emits an acoustic signal
without changing the active functions.
Activation:
1- The function is activated with the hob on.
2- Press the “ + ” and “ - ” keys simultaneously.
3- Adjust the time within about 10 seconds by
using the “ + ” and “ - ” keys. By pressing the “ - ” key
directly the time will be set at 30 minutes.
- If no zone is activated or if the hob is deactivated
by selecting the ON/OFF key, the decimal point on
the R2 and R3 displays begins to flash.
- If the hob is turned on with the Minute Minder
function active, zeros will appear on all the displays.
By pressing the “ + ” and “ - ” keys simultaneously, the
remaining time will appear.
- In order to view the remaining time of the Minute
- 28 -