B medical systems MB 3000 G, Instructions For Use Manual

Page: 15 / 32

15
3.5 Electrical Connection
WARNING
• Only connect to a grounded socket. If the power supply outlet is not grounded, it will be necessary to
have a ground installed by qualified personnel.
• Before connecting, check whether the details on the nameplate in the interior correspond to local val-
ues. Use of any other voltage or frequency other than that on the nameplate may cause fire or electric
shock.
• Disconnect the unit from power supply prior to any repair or maintenance in order to prevent electric
shock or injury.
• Do not touch any electrical parts (such as power supply plug) or operate switches with a wet hand. This
may cause electric shock.
• When disconnecting, always pull the plug and never the cable. Pulling the cord may result in electric
shock or fire by short circuit.
CAUTION
• Before connecting and switching the unit on for the first time, allow it to stand for 30 minutes.
• To prevent problems with other electrical equipment causing malfunction, the unit should be connected
to a separate circuit. Never connect it to a single socket with other electrical equipment by means of a
multi-socket.
• Make sure that the plug is easily accessible so that if needed it can be easily be disconnected without
having to move other equipment or furniture.
• All connected devices/signaling equipment must provide reinforced or double insulation for protection
against electric shock
• The normal operating voltage is 230 volts, 50Hz or 60Hz, A.C.