![background image](http://html.mh-extra.com/html/b-b-sensors/1m/1m_operating-manual_460614053.webp)
OPEARTING MANUAL
Technische Änderungen vorbehalten
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-100 24.06.2022
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
53 / 88
The USB socket on the side is only intended for setup and service and not for continuous use
Please do never connect a supply voltage to the analog outputs as this will
destroy the output!
The CT is not a 2-wire sensor!
The supplied USB cable can be connected to the side of the electronics box. The device can be operated
directly via the CompactPlus Connect software
4.1.4
Power Supply
Please use a stabilized power supply unit with an output
voltage in the range of
8–36 VDC
(
4M: 8-30 VDC
) which
can supply
100 mA
. The ripple should be max.
200 mV
.