1
User manual ALFANET 31
Cool/Heat Thermostat.
VDH doc. 032679
Version: v1.0
Date: 24-11-2003
Software: ALFA31
File: Do032679.WP8
Range: -50/+50°C per 1°C
* Installation.
On the topside of the
ALFANET 31
you can see how the sensor, power supply and relay have to be
connected.
After connecting the
ALFANET 31
to the power supply, a self test function is started. As this test is
finished, the measured temperature appears in the display.
When the relay is activated, the led 'on' will light-up in the display.
And the
ALFANET 31
is by use of the
ALFANET PC-INTERFACE
controllable on the PC.
* Control.
The
ALFANET 31
thermostat can be controlled by three pushbuttons on the front. These keys are;
SET
- view / change the setpoint.
UP
- increase the setpoint.
DOWN
- decrease the setpoint.
* Viewing setpoint.
By pushing the
SET
key the setpoint appears in the display. The led 'set' starts blinking. A few
seconds after releasing the
SET
key the setpoint disappears and the measured temperature is shown
in the display.
* Changing setpoint.
Push the
SET
key and the setpoint appears in the display. Release the
SET
key. Now push the
SET
key again and together with the
UP
or
DOWN
keys the setpoint can be changed. A few seconds after
releasing the keys the measured temperature shows again in the display.
