H3000 Pilot Handbook___________________________________________________
HB-3001-02
16
GETTING STARTED
GPD KEYS EXPLAINED
Power / Lights
To power on/off the H3000 system press and hold
the Power key until the unit powers up/powers
down. At start up the Pilot screen will be
displayed.
A Short press of the Power key will provide full
background illumination on all system displays.
Further short presses of the key decrease the
illumination in three stages from full brightness to
OFF.
The next press of the key enables full
illumination
.
Menu / Enter
The Menu/Enter key either activates the main
menu or actions a menu item.
When the GPD is in compass mode NORMAL
pressing the menu key (MENU) will bring up the
main menu as shown on page 21
However if a menu item is highlighted the key
acts as an enter key to select the menu choice.
If editing a parameter this key also confirms the
new value.
Pilot function keys
These are dedicated function keys that will
control the Pilot regardless of which menu you
are navigating.
Pressing one of these keys whilst in any menu
will bring up the Pilot screen and perform the
relevant function at the same time.
Summary of Contents for H3000 Pilot
Page 1: ...Pilot Handbook www bandg com ...
Page 106: ......