Azure Cielo Real-Time PCR Systems User Manual
Page 13
• The Cielo instrument will now begin updating. Do not leave the instrument unattended during this
process, which will only take approximately one minute.
Figure 8. As the Instrument Software Update proceeds, updates to each module will show progress with a moving bar.
• Once the instrument indicates that the update is complete, the USB drive should immediately be
removed from the USB port on the front.
Figure 9. Once the instrument has successfully
updated the software, it will instruct the user to
remove the USB drive and select OK to reboot the
system.
• If the USB drive is not removed, the system will recognize a firmware update, and begin again the
already completed process. If this should happen, just select CANCEL, and remove the USB drive.
Switch the instrument off using the back power button, wait thirty seconds, and then switch back
on the power button.
• The system will automatically restart, with the new firmware in place.