Axonics SNM System 2501, Programmer'S Manual

Page: 17 / 404

13 13
Summary of CP Buttons and Connections
The CP has two physical buttons:
1 Power Button – turns the CP on and off.
2 Stimulation Button – turns test stimulation on and off
(select screens only)
The CP has a Connector Panel with plugs for the cables
that are used with the CP. The symbols on the Connector
Panel indicate which cable should be used with each plug:
3 EMG Channel 1
4 EMG Ground
5 EMG Channel 2
6 Tined Lead Test Stimulation
7 Stimulation Ground
8 Foramen Needle Test Stimulation
9 Power Input
The purposes and uses of these buttons and connections
are described throughout this manual
Note: EMG functionality (
3
,
4
,
5
) is not available in this model of
the Axonics Clinician Programmer.
1
2
3
4
5
6
7
8 9
3 4 5 6 7 8 9
110-0054 rev E_output.indd 13 11/20/18 8:06 AM