7
3
A Quick Start
When Powering-up
On powering up the Synapse frame, the card set will use basic data and
default initialisation settings. All LED’s will light during this process. After
initialisation, several LED’s will remain lit – the exact number and
configuration is dependent upon the number of inputs connected and the
status of the inputs.
Changing settings and
parameters
The front panel controls or Axon Cortex Software can be used to change
settings. An overview of the settings can be found in chapter 5, 6 and 7 of
this manual.
Front Panel Control
Front Panel Display and Cursor
Settings are displayed and changed as follows;
Use the cursor ‘arrows’ on the front panel to select the menu and parameter
to be displayed and/or changed.
Press ►
To go forward through the menu struc ure.
Press ◄
To go ack through the menu structure.
Press ▲
To move up within a menu or increase the val e
of a parameter.
Press ▼
To move down through a menu or ecrease the
value of a parameter.
REMARK: Whilst editing a setting, pressing ► twice will reset the value to
its default.
[No Alarms]
