23
Input_Loss_A
Input_Loss_A
determines what the output of outputs A is in case of
lost input:
Freeze:
a capture of the last good field or frame.
Colorbar
:
a color bar
Zoneplate
: a zone plate
Black
:
a black output.
Grey
:
a grey output.
Green
:
a green output.
No-SDI-Out:
no SDI carrier (completely mute output)
The default setting is
freeze
.
Input_Loss_B
Input_Loss_B
determines what the output of outputs B is in case of
lost input:
Freeze:
a capture of the last good field or frame.
Colorbar
:
a color bar
Zoneplate
: a zone plate
Black
:
a black output.
Grey
:
a grey output.
Green
:
a green output.
No-SDI-Out:
no SDI carrier (completely mute output)
The default setting is
freeze
.
AUDIO PROC AMP
These settings are only available in the GIX110 and HIX110
NonPCM-Bypass
With this setting you can switch to bypass audio processing for all non-
PCM audio
on
or
off
.
Audio-Phase
If this setting is set to
Align
, the card ensures audio-phase alignment
between multiple audio channels and audio groups, which is necessary
for multi-channel (surround) purposes. If errors in the signal-chain occur
the de-embedder blocks reset synchronously to maintain audio-phase-
alignment. If this setting is set to
Off
, the card
eats
-
all
audio including
errors. Even if there are DBN/ANC/ECC or channel-sequence errors, the
de-embedder will pass them. Be aware that audio-phase-alignment
between multiple audio channels and audio groups cannot be maintained
if this setting is set to
Off
.
Note:
This setting can be helpful to solve problems in the field using
equipment which doesn’t follow the standards correctly.
AudioStatusBits
With this setting you select whether the audio status bits should be
Transparent
(same status bit on the outputs as on the inputs) or to
overwrite
them with new status bits.
