background image

51 

This product contains open-source software 

This product contains open-source software licensed under the GNU Public License (GPL). A copy of the 
GNU Public License is included below. Under this license you are eligible to receive a copy of the source 
code of this software including any changes. 
 
Axon Digital Design shall provide the source code on request either through physical distribution or 
electronic communication. For physical distribution you may be charged a fee that covers distribution costs. 
This offer is valid up to three years after date of purchase. Please direct your request to the support 
department of Axon Digital Design. 
 
Axon Digital Design supports open-source software by participating in the development of open-source 
projects or submitting improvements to these projects. For more information see 

http://opensource.axon.tv/

 

 

GNU Public License version 2 

 

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 
 

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed 
under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the 
P

rogram” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a 

portion of it, either verbatim or with modifi cations and/or translated into another language. (Hereinafter, translation is included without 
limitation in the term “modifi cation”.) Each licensee is addressed as “you”. 
 
Activities other than copying, distribution and modifi cation are not covered by this License; they are outside its scope. The act of 
running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the 
Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 
 
1. You may copy and distribute 

verbatim copies of the Program’s source code as you receive it, in any medium, provided that you 

conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the 
notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this 
License along with the Program.  
 
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a 
fee. 
 
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and 
distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: 
 

a) 

You must cause the modified files to carry prominent notices stating that you changed the fi les and the date of any change. 

b) 

You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any 
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. 

c) 

If the modified program normally reads commands interactively when run, you must cause it, when started running for such 
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a 
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program 
under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive 
but does not normally print such an announcement, your work based on the Program is not required to print an 
announcement.) 

 
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and 
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those 
sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work 
based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend 
to the entire whole, and thus to each and every part regardless of who wrote it. 
 
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to 
exercise the right to control the distribution of derivative or collective works based on the Program. 
 
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a 
volume of a storage or distribution medium does not bring the other work under the scope of this License. 
 
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms 
of Sections 1 and 2 above provided that you also do one of the following: 
 

a) 

Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of 
Sections 1 and 2 above on a medium customarily used for software interchange; or, 

b) 

Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of 
physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be 
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, 

Summary of Contents for Synapse GIX100-110
























































Reviews: