Setting Up the Morticer
14
Fig 25-26-27
Front to Back Movement
Pull the wheel out to engage the drive gear into the lead
screw thus enablining the table to move from front to
back, see fi gs 25-26-27.
Gear meshed with lead screw
Table Distance Stops
To the rear of the worktable there are two collar stops
to set a required distance for repetitive work.
Loosen the collar clamping handle (A) and slide the
collar (B) along the collar stop bar (C) until required
distance is reached then re-tighten the handle to lock
the collar in position. Repeat for the other collar, see fi gs
28-29-30.
Fig 28-29-30
B
A
C
Collar stop block
Collar stop assembly
