AXIS Q6055-S PTZ Network Camera
Specifications
I/O terminal connector
2-pin terminal block.
External connectors
Ground screw
Ground screw for connecting the media converter
switch to earth ground. Make sure that both ends of
the grounding wire are in contact with their respective
grounding surfaces.
Power connector
2-pin terminal block for power input.
Function
Pin
Notes
0 V DC (-)
1
DC input
24 V DC
2
Power in from power supply (sold
separately)
Network connector RJ45
Two RJ45 connectors (10/100Base-T) for network.
Network slot SFP
Two SFP slots (100Base-FX/1000Base-X) for network.
Each RJ45 and SFP port has its own dip switch. The dip switches control how the port forwards data. For more information,
see
page 21
.
I/O terminal connector
6-pin configurable I/O terminal block, which is connected to the camera through the multicable. Use with external devices in
combination with, for example, tampering alarms, motion detection, event triggering, time lapse recording and alarm notifications.
In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
•
Digital output
– For connecting external devices such as relays and LEDs. Connected devices can be activated by the
VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output
will show as active (shown under
System Options > Port & Devices > Port Status
) if the alarm device is activated.
•
Digital input
– An alarm input for connecting devices that can toggle between an open and closed circuit, for
example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the
input becomes active (shown under
System Options > Port & Devices > Port Status
).
6-pin terminal blocks for:
• Digital Input/Output
• Power (DC output)
• 0 V DC (-)
Function
Pin
Notes
Specifications
0 V DC (-)
1, 4, 6
0 V DC
20
