Axis Q6032 User Manual Download Page 5

Page: 5 / 57

AXIS Q6032 PTZ Dome Network Camera

Hardware overview

• Connecting to an AXIS Video Hosting System service, see

page 40

. To connect, press and hold the button until the

Status LED

ashes green.

• Connecting to AXIS Internet Dynamic DNS Service, see

page 41

. To connect, press the button once.

• Restoring the product to factory default settings, see

page 47

Multi-connector -

Terminal connector for connecting external equipment:

• Audio equipment

• Input/Output (I/O) devices

• AC/DC power supply

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP

rating, see

Multi-Connector Cable (sold separately), on page 48

SD card slot -

A standard or high-capacity SD card (not included) can be used for local recording with removable storage. For

instructions on how to insert and remove an SD card, please refer to the Installation Guide.

Note

Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to

Setup

> System Options > Storage > SD Card

and click

Unmount

LED indicators

Color

Indication

Unlit

Connection and normal operation

Amber

Steady during startup. Flashes during

rmware upgrade.

Amber/red

Flashes amber/red if network connection is unavailable or lost.

Red

Flashes red for

rmware upgrade failure.

Green

Shows steady green for 10 seconds for normal operation after restart.

Summary of Contents for Q6032


























































Search results

Summary of Contents for Q6032

Reviews:

Related manuals for Q6032

Brands by name

Popular brands

Axis Q6032, User Manual

Search results

Summary of Contents for Q6032

Reviews:

Related manuals for Q6032

Brands by name

Popular brands