Axis Q6032 User Manual Download Page 36

Page: 36 / 57

AXIS Q6032 PTZ Dome Network Camera

Recordings

If using an SD card, the Axis product can be con

gured to record video continuously or as a result of a triggered or scheduled event:

• To start a continuous recording, see

page 37

• To set up triggered and scheduled events, see

Events, on page 30

• To access event recordings, see

page 36

Event recordings

Event recordings made to the product’s SD card (not included) can be accessed from the

Recordings > Events

page. For instructions

how to set up triggered and scheduled events, see

Events, on page 30

From the

Recordings > Events

page, you can:

•

Play

recordings from the SD card

• View information on the recording, click

Properties

•

Lock

recordings to prevent accidental removal

•

Remove

recordings

•

Download

recordings

Multiple recordings can be downloaded at the same time. Select the recordings and click

Download

. The downloaded

le is a zip

containing a minimum of three

les, of which the Matroska (mkv)

les are the actual recordings. The recordings are time-stamped

with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter

can be downloaded from www.axis.com/techsup/software

Summary of Contents for Q6032


























































Search results

Summary of Contents for Q6032

Reviews:

Related manuals for Q6032

Brands by name

Popular brands

Axis Q6032, User Manual

Search results

Summary of Contents for Q6032

Reviews:

Related manuals for Q6032

Brands by name

Popular brands