Axis Q6032 User Manual Download Page 44

Page: 44 / 57

AXIS Q6032 PTZ Dome Network Camera

System Options

The following traps are available:

• Cold start

• Warm start

• Link up

• Authentication failed

SNMP v3

provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see

HTTPS, on page 38

. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

Reset to factory default settings, on page 47

UPnP

The Axis product includes support for UPnP

. UPnP

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

can be disabled under

System Options > Network > UPnP

RTP/H.264

The RTP port range and multicast settings are con

gured under

System Options > Network > RTP

The RTP port range de

nes the range of ports from which the video/audio ports are automatically selected. For multicast streams,

only certain IP addresses and port numbers should be used.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

Storage

SD Card

The SD/SDHC memory card (not included) is managed on the

System Options > Storage > SD Card

page.

The settings under

Storage Device

are used to identify and monitor the status of the SD card, and to

unmount

the SD card

before removal. Mounting is done automatically when a card is inserted. SD cards are normally preformatted when purchased,

but if needed, click

Format

to format the card.

Note

To prevent corruption of recordings, the SD card should always be unmounted before removal.

If the card’s status shows as failed, click

Check disk

to see if the problem can be found and then try

Repair

The settings under

Storage Device Settings

are used to con

gure removal of recorded video. Automatic disk cleanup can be enabled

and set according to a schedule. The disk can be locked to prevent removal of recordings.

For more information, see the online help

Summary of Contents for Q6032


























































Search results

Summary of Contents for Q6032

Reviews:

Related manuals for Q6032

Brands by name

Popular brands

Axis Q6032, User Manual

Search results

Summary of Contents for Q6032

Reviews:

Related manuals for Q6032

Brands by name

Popular brands