Appendix B -
Troubleshooting
43
Connecting
Symptoms
Possible causes
Remedial actions
Your
Bluetooth
client can find
the AXIS 9010 after an inquiry
has been made, but you cannot
connect to the AXIS 9010.
The AXIS 9010 is already serving
a maximum number of
Blue-
tooth
clients.
Wait and try to connect again
later.
The AXIS 9010 is not connected
properly.
1. Check Power and Network
indicator.
2. Check that assignment of IP
addresses for the AXIS 9010 and
for
Bluetooth
clients is correct.
3. To further check the IP
addresses, run the Ping com-
mand from another computer as
described in "IP address check"
at the end of this chapter. Fol-
low the appropriate recommen-
dations.
Your
Bluetooth
client lacks the
correct
Bluetooth
Profile - the
LAN Access Profile or the PAN
Profile.
Contact the supplier of your
Bluetooth
client and check if an
upgrade with the correct profile
is possible. Otherwise, obtain a
Bluetooth
client with the correct
profile.
The settings of your
Bluetooth
client are not correct.
Check instructions for your
Bluetooth
client.
Your
Bluetooth
client does not
support master/slave configura-
tion.
Instructions for disconnecting
the master/slave function can be
found at www.axis.com
Your
Bluetooth
client does not
support passkey configuration.
Instructions for disconnecting
the authentication function can
be found at www.axis.com
