Axis 2460 User Manual Download Page 69

Page: 69 / 72

AXIS 2460 User’s Manual

Technical Specifications

Appendix H - Technical Specifications

System Requirements -

Microsoft Internet Explorer 5.0 or higher, running on Windows 98,

ME, XP, NT or 2000. Other browsers on other operating systems (e.g. Linux, UNIX, Mac)

can be used for installing the product and for administrative purposes, but live images and
the Video Player will not function correctly.

Networking Protocols -

The AXIS 2460 uses the standard TCP/IP suite of protocols.

Installation -

Physical network connection using RJ-45 twisted pair cable, or remote

connection using any standard serial modem. The product is intended for indoor use only.

Management -

Remote configuration and status using Web-based Administration Tools.

Image Features -

Time/date stamp, text overlay, variable size, color CGI control.

Image Resolution

• Low: 176 x 112 (NTSC), 176 x 144 (PAL)
• Normal: 352 x 240 (NTSC), 352 x 288 (PAL)
• High: 704 x 480 (NTSC), 704 x 576 (PAL)

Networking -

10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP, NTP,

ARP and BOOTP.

I/O Connector -

Used for connecting external alarm devices, e.g. temperature sensors and

switches. Provides one relay switch output, four digital photo-coupled inputs, an RS-485

interface, and auxiliary power.

RS-232 Connectors

• COM-1 - RS-232, max 115 Kbps. Multiplexed with the RS-485 port on the terminal block.
• COM-2 - RS-232, max 115 Kbps, half-duplex. A modem is connected here.

RS-485 -

Available from terminal block connector.

Video Inputs -

4 BNC composite video inputs with 75 Ohm/Hi Z termination. Autosensing

for NTSC and PAL.

Video Outputs -

4 BNC video loop-through ports.

Security -

Multi-user password protection. Built-in Firewall. Allowed IP addresses can be

specified.

Operating Conditions: -

Temp: 41-104

F (5-40

C), Humidity: 8-80% RHG.

Power -

50/60 Hz,115/230V, Max 1A (typically 60W).

Summary of Contents for 2460









































































Search results

Summary of Contents for 2460

Reviews:

Axis 2460, User Manual, Page: 69 / 72

Search results

Summary of Contents for 2460

Reviews: