manualshive.com logo in svg

Axis 2460, User Manual, Page: 38 / 72

Share
Download
Axis 2460 User Manual Download Page 38

 

System Options

 

AXIS 2460 User’s Manual

 

38 

3.

The 

System Overview

 is now displayed. Links to all of the product’s functions are 

presented as;  a) links in the left hand margin, b) as a clickable schematic diagram of the 

unit. Click the relevant link for the parameters or functions you wish to configure. On-line 

help is available by clicking the yellow question mark at the upper right. 

The system is configured and modified directly from these pages. This can be done from 
any computer that can access the unit.

System Options Overview

The table below provides a brief overview of the System Options. Each section is explained 

in more detail in the pages that follow.

Administration

Description

See page

Network Settings

Configure TCP/IP settings, enable BOOTP and restrict bandwidth.

page 39

Mail Settings

Configure SMTP-settings for sending e-mail messages notifying recipients of recordings, 
error messages, system messages, etc.

page 40

COM-Ports

Configure the COM-ports for Generic TCP/IP, Generic HTTP, Pan Tilt Zoom devices, or a 
modem (port 2 only).

page 41

Pan/Tilt/Zoom

Select the PTZ driver(s) to use on the COM-ports.

page 42

Modem

Configure the connected modem. 

page 42

Modem - ISP Settings

Make settings for connecting to your ISP.

page 43

Date & Time

Set the system time, manually or automatically.

page 43

Users

Create and delete users and passwords, and modify the Administrator’s password. 

page 45

Firewall

Protect your AXIS 2460 against unauthorized access, using the built-in firewall. Allowed 
IP addresses and protocols can be specifed. 

page 46

Maintenance

Provides tools for restarting the server, formatting all disks and for resetting to the 
factory default settings.

page 47

Maintenance - Advanced

Displays information about the connected disks and provides tools for formatting and 
checking individual disks.

page 47

Support

Provides links to all of the support and help functions for the product.

page 48

Summary of Contents for 2460









































































Reviews:

No comments