manualshive.com logo in svg

Axis 2460, User Manual, Page: 39 / 72

Share
Download
Axis 2460 User Manual Download Page 39

 AXIS 2460 User’s Manual

System Options

 

39 

Network Settings

From the Network Settings, configure the TCP/IP network settings as follows:

Automatic Configuration 

Enable BOOTP  - 

Check this box to use BOOTP to automatically assign an IP address. This 

requires a BOOTP server on your system.

Manual Configuration 

IP Address  - 

Specify a unique 32-bit IP address for your Network DVR, to establish 

communication with your network. Written as four numbers separated by periods, each 

number within the address must be in the range 0 - 255. For example: 123.123.123.123 

Note:

IP addresses can be assigned at random within isolated networks, provided that 
each given address is unique. To avoid unnecessary number duplication and IP 

clashes, only use registered IP addresses when connecting to the Internet. It is 

strongly recommended that you contact your network administrator prior to 
assigning an IP address for your product.   

Default Router - 

Specify the default router (Gateway) used for connecting to other networks 

and network segments.

Subnet Mask - 

Specify the subnet mask for the Network DVR. 

Host Name - 

If you are running a DNS server on your network and wish to connect to the 

AXIS 2460 using a name, then enter the product’s host name here. The host name is 

usually the same as the assigned DNS Name. A host name is always the first part of a Fully 

Qualified Domain Name and is always one word, with no period. For example, 

myserver

 

is the host name in the Fully Qualified Domain Name 

myserver.axis.com

.

Domain Name - 

Enter the name of the domain your AXIS 2460 belongs to.

Primary DNS Server - 

Enter the IP address of the primary DNS server. This specifies the server 

that normally provides the translation of domain names to IP addresses on your network. If 
the server is not able to resolve a domain name immediately, it will then distribute the 

domain name query to other DNS servers on the network.

Secondary DNS Server - 

Specify the IP address of the secondary DNS server. This is the 

address of the server normally used to provide the domain name translation if the primary 
DNS server is unavailable.

Summary of Contents for 2460









































































Reviews:

No comments