AXIS 2400/2401
Administration Manual
Using the Video Server
37
Camera Positioning
Although very similar, the navigational functionality is slightly different for each of the available
pan tilt drivers. The table below describes the basic positioning methods, and the level to which
these are supported by the drivers available from the Administration pages:
Camera Zoom
In a fashion similar to that provided for positional control, the degree of camera zoom is controlled
by clicking a scaled toolbar that represents the full tele-zoom potential for the selected device.
Click the left or right arrows within the toolbar for
stepped
increases for
Wide
and
Tele
zoom
respectively. Clicking anywhere along the toolbar gently adjusts the level of camera zoom by a
variable
value predetermined by the device.
Note:
Variable zoom control is not supported by the Pelco and Ernitec drivers.
Assuming Preset Positions
To enable quick and accurate camera positioning to known camera
hotspots,
the
Administrator(s)
can create up to twenty
Preset Positions
that can be reinstated at any time by the
users
.
Choosing a preset position from the drop-down dialog immediately causes the selected camera to
assume the predefined orientation.
Positioning method
Diamond
Smartscan
Sony
Canon
Videmech Ernitec
Pelco
Step: Click the left, right, up or down arrows
within the positional toolbar to move the selected
camera in 5
o
steps (approx) in the chosen direction.
Yes
Yes
Yes
Yes
Yes
Yes
Smooth: Each positional toolbar represents the full
viewing angle for the selected camera.
Click anywhere along the toolbar to gently travel the
camera to its equidistant position.
Yes
Yes
Yes
Yes
No
No
Click in picture: Click directly in the picture to
define the central position of the selected camera.
Yes
Yes
Yes
Yes
No
No
Home: Click to move the camera to its home
position, as defined by the pan tilt device.
Yes
Yes
Yes
Yes
No
No