manualshive.com logo in svg

Axis 2400, Administration Manual, Page: 29 / 80

Share
Download
Axis 2400 Administration Manual Download Page 29

 

AXIS 2400/2401

 

Administration Manual

Configuring the Video Server

 

27

 

Using the Detailed View

Clicking the 

Detailed View

 displays the 

Network Settings

 dialog which is navigated by clicking 

any visible tag. From this dialog you can display, edit and refine the settings for any supported 
network protocol.

Note:

Any changes that you make are only implemented when you click the OK button; consequently, 
all of the protocols can be safely browsed and edited before deciding to save the settings.

With reference to the on-line help information and the table below, use the 

Detailed View 

 to

 

manually configure the Network Settings:

TCP/IP Parameters

Description

BOOTP

Enable the BOOTP protocol for downloading the Internet address automatically. For further 
information on using BOOTP see also Using BOOTP in UNIX, on page 16. If you intend to use 
the AXIS IP Installer BOOTP must be enabled.

RARP

Enable the RARP protocol for downloading the Internet address automatically to the unit. For 
further information on using RARP, see also Using BOOTP in UNIX, on page 16.

IP Address

Specifies the unique 32-bit IP address of your unit.

Default Router

Defines the default router for the AXIS 2400/2401 which by default, is set to automatic router 
search. If script applications the default router must be defined.

Subnet Mask

Defines the subnet mask for the AXIS 2400/2401. Used for determining when the traffic 
should be sent via a router. The default 0.0.0.0 indicates automatic router sensing. If script 
applications the subnet mask must be defined.

Bandwidth

Default to unlimited, this parameter defines the network bandwidth restriction for the video 
server; particularly useful for connection to busy and/or heavily loaded networks.

DNS Parameters

Description

Primary DNS

Defines the IP address of the primary DNS server. Used for identifying computers with names 
instead of IP addresses.

Secondary DNS

The IP address of the secondary DNS server. The secondary DNS server will be used in case 
the primary DNS server is unavailable or disconnected.

SMTP Parameters

Description

SMTP Mail Server

Defines the server that is to provide your e-mail facilities.

SMTP Return 
Address

The reply address for e-mails sent by the AXIS 2400/2401; that is, the name address that is to 
appear in the ‘sent by’ field of the dispatched e-mail.

Summary of Contents for 2400

















































































Reviews:

No comments