REV03016730010220
15
3.
To set up a runtime simply enter a ‘Start’ and ‘Stop Time’ (using military format) in one of three timer boxes for the
desired weekday.
4.
To toggle between weekdays, simply press the available buttons on the left or right of the screen labeled with the
abbreviation for the previous or next day in the week (e.g. “MON”, “WED”).
Touchscreen Menu Structure (7000 Series Controller)
Modbus TCP/IP Communication (7000 Series Controller)
Setting up the IP Address:
1.
From the Main Menu, press the “CONFIG” button.
2.
Input “9999” and press the enter key (“
↵
”).
3.
Push “IP Config” and continue onto the next page.
4.
Enter the desired values for the PLC IP Address, PLC IP Mask, PLC IP Gateway, PLC Remote IP,
and Network ID.
5.
Power cycle the touch screen HMI/PLC.
Note: When communicating via Modbus TCP/IP (Port 3 – Ethernet Cable Slot), the PLC Remote IP and Network ID do not
need to be utilized for the proper functionality.
Home
Screen
Alarm
History
Alarms
Groups
w/Pending
Alarms
Alarms In
Group
Alarm Detail
Auto Timer
Config.
Manual
Control
Config.
Password
"9999"
Config. Menu
Clear
Totalizer
Clear Alarm
History
IP Setup
Valves
Summary of Contents for STS 6030
Page 2: ...REV03016730010220 1 ...