DVR User Manual
28
(such as Gmail) according to actual needs.
Step 3:
Set sender‟s address and password.
Step 4
: Set receiver‟s email address and click “Test” button to test the validity of the mailbox.
Fig 4-26 Network Configuration-Email
Attaching image:
If selected, the system will attach images when sending emails.
4.6.4 Server
This function is mainly used for connecting ECMS. The setting steps are as follows:
Step 1
: In the server interface, select “Enable” as shown in the Fig 4-27.
Fig 4-27 Network Configuration-Server
Step 2
: Check the IP address and port of the transfer media server in the ECMS. The default
server port for auto report is 2009. If it is modified, please enter into the transfer media
interface to check.
Step 3
: Enable the auto report in the ECMS when adding a new device. Then input the
remaining information of the device in the ECMS. After that, the system will auto allot a
Device ID. Please check it in the ECMS.
Step 4
: Input the above-mentioned server IP, server port and device ID in the server interface.
Then click “Apply” button to save the setting. Now, the ECMS system will automatically
connect this device.