Avue ADR8708XE User Manual Download Page 22

Page: 22 / 66

DVR User Manual

Before Configuration, please make sure your DVR has been installed with HDD and has
completed its initialization.

4.3.1 Enable

Step 1

: Enter into Menu



Setup



Record



Enable interface. Refer to Fig 4-10:

Fig 4-10 Record Configuration-Enable

Step 2

: Checkmark record and audio.

Step 3

: Select All to setup the same settings for all channels.

4.3.2 Record Bitrate

Step 1

: Enter into Menu



Setup



Record



Record Bitrate. Refer to Fig 4-11:

Step 2

: Setup rate, resolution, quality, encode and max bit stream.

Step 3

: Select “All” to set the same settings for all channels.

Step 4: Click “Apply” button to save the setting.

Fig 4-11 Record Configuration-Record Bitrate

Parameter

Meaning

Record

To enable/disable recording for the channel

Audio

To enable/disable audio recording for the channel

Summary of Contents for ADR8708XE


































































Search results

Summary of Contents for ADR8708XE

Reviews:

Brands by name

Popular brands

Avue ADR8708XE, User Manual

Search results

Summary of Contents for ADR8708XE

Reviews:

Brands by name

Popular brands