DVR User Manual
18
4.3.3 Time
Step 1
: Enter into Menu
Setup
Record
Time interface to set recording time. Refer to Fig
4-12:
Step 2
: Set Pre-alarm record time and post-alarm record time. Select “All” to set the same
settings for all channels.
Pre-alarm Record Time:
Set the time in seconds to pre-record before the actual recording
begins.
Post-alarm Record Time:
Set the time in seconds to post-record after the actual recording
has finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time:
Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.
Step 3
: Click “Apply” to save the setting.
Fig 4-12 Record Configuration-Time
4.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the
video. The user can also choose a position for the stamp on the screen
.
To setup stamp as follows:
Step 1
: Enter into Menu
Setup
Record
Stamp interface. Refer to Fig 4-13:
Parameter
Meaning
Rate
Range from: 1-15
（
NTSC
）
1-12(PAL)
Resolution
Supports1080P
Quality
The higher the value is, the clearer the recorded image
is. Six options: lowest, lower, low, medium, higher
and highest.
Encode
VBR and CBR
Max bit stream
Range from: 1536~12288kbps
