DVR User Manual
27
item and check PPPoE checkbox and then enter username and password. Once the setup
is completed, your DVR will automatically dial up into your network.
Step 5
: Test the effectiveness of the network by clicking “Test” button after you set up the
network.
Step 6
: If the network is well connected, please click “Apply” button to save the setting.
4.6.2 Sub Stream
To setup sub stream:
Step 1
: Enter into Menu
Setup
Network
Sub Stream interface. Refer to Fig 4-25:
Step 2
: Select fps, resolution, quality, encode and max bit rate
Step 3
: Select “All” to set the same settings for all channels.
Fig 4-25 Network Configuration-Sub Stream
4.6.3 Email
To set up Email:
Step 1
: Enter into Menu
Setup
Network
Email interface. Refer to Fig 4-26:
Step 2:
Set SMTP Server and port.
SMTP Server/Port:
The name and port number of SMTP server. You can setup SSL check
Parameter
Meaning
FPS
Range from: 1-25
Resolution
Support CIF
Quality
The quality of the clients‟ image. The higher the value is, the
clearer the record image. Six options: lowest, lower, low, medium,
higher and highest.
Encode
VBR and CBR
Max bit rate
Range from: 64 Kbps, 128 Kbps, 256 Kbps, 512 Kbps, 768 Kbps,
1Mbps, 2 Mbps
