Room Alert 4E
A
B
How To Install Your Room Alert 4E
Step 1: Connect Your Room Alert 4E Hardware
A. Connect to your network first.
•
Connect one end of a standard Ethernet cable
to the Room Alert 4E’s Ethernet port.
•
Connect the other end to a network jack.
B. Then connect to a power source.
•
Plug one end of AVTECH’s International Power Adapter into the Room Alert 4E’s
power port.
•
Plug the other end into a surge-protected power source.
Your Room Alert 4E is now powered and discoverable on your network!
Step 2: Open And View Your Room Alert 4E In Your Web Browser
With The Built-In Web Interface
•
Enter your Room Alert 4E’s IP address in your web browser’s address bar to access
the interface.
Use only AVTECH’s International Power Adapter. Others could
damage the Room Alert 4E and void your warranty. If you don’t
have one, please visit our online store at
AVTECH.com
.
NOTE
AVTECH Software, Inc.
7