Room Alert 4E
Ping Options
You may configure up to eight IP addresses to ping from your Room Alert 4E in this screen.
Room Alert will send a ping to those addresses to check if the host is reachable. If the host is up,
the ping will return as successful and register a normal state; if the host is down, or Room Alert
cannot reach it, the ping will return as failed and register an alarm state.
Navigate to
Settings
Ping Options
to open the Ping Settings screen.
1.
In “Retry Count,” you may enter the number connection attempts Room Alert will make
before an alarm condition is generated. The default is 1.
2.
In “Ping Timeout,” you may enter the number of seconds to wait for a reply to the
connection attempt.
3.
In the “Ping Host Information” table, you may enter up to 8 IP Addresses in the “Host
Address” column in the following format: xxx.xxx.xxx.xxx. The default is 0.0.0.0.
AVTECH Software, Inc.
29
