Room Alert User’s Guide
29
To obtain an IP address automatically using DHCP:
1.
Select
Obtain IP Address Automatically
.
2.
Typically, leave the BOOTP, DHCP and AutoIP checked (enabled), which is the default.
3.
Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
IP Address Configuration—Static IP
To assign a static IP address:
1.
Select
Use The Following IP Configuration
.
2.
In IP Address, enter the new static IP address.
3.
In Subnet Mask, enter the subnet mask.
4.
In Default Gateway, enter the gateway IP address.
5.
In DNS Server IP, enter the DNS server IP address.
6.
Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
TIP
Make sure that you do not use an IP address that is already assigned to another
device. Also, set the IP address within your current subnet range; otherwise, you
may not be able to discover your Room Alert.