Room Alert User’s Guide
35
To configure your Room Alert to send SNMP Traps:
1.
In Trap Send IP 1, enter the IP address of the host system that runs your 3
rd
-party SNMP
monitoring application.
2.
In Trap Send IP 2 and Trap Send IP 3, you may enter the IP addresses of other host
systems that run 3
rd
-party SNMP monitoring applications, or leave the default, 0.0.0.0.
3.
Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
SNMP Trap Receiving Configuration
( Room Alert 4E)
You may configure your Room Alert 4E to receive SNMP Traps from up to three other network
devices, such as printers, fax machines, etc. When Room Alert 4E receives a trap message, it
generates an alarm and can toggle a light tower or relay outputs.
To configure your Room Alert 4E to receive SNMP Traps:
1.
In Trap Receive IP 1, enter the IP address of the network device.
2.
In Trap Receive IP 2 and Trap Receive IP 3, you may enter the IP addresses of other
network devices, or leave the default, 0.0.0.0.
3.
Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
If all of the Trap Receive IP addresses are left blank, any SNMP trap received will generate an
alarm.
