Room Alert User’s Guide
23
The Profile you choose here applies to all sensors connected to the WiSH being
configured: its internal, external digital and external switch sensors.
NOTE
8.
Select
Save Settings
at the top or bottom of the page. Your Room Alert will
automatically reboot and commit your changes.
Repeat the steps above for each discovered WiSH. A maximum of ten WiSH or WiSPR hubs can
be used with each Room Alert 32W monitor.
NOTE
If you have an AVTECH Light Tower, Relay Switch Sensor or built-in relays on your
Room Alert, you may configure Alarm Profiles to toggle them on and off when alarms
are detected. Please refer to the
Alarms
section in this manual for further information.
Please also see the
Advanced
section in this manual for the WiSH Options tab,
which provides more configuration options for WiSH and WiSPR sensors.
