If the case is connected to the cathode, and the pin(s) are used for the anode, the
arrangement shown below must be used:
This spring pin must
contact the underside
of the case. It provides
the anode connection.
The cathode pin of
interest must be inserted
into this socket. For dual-
diode devices, rotate the
TO-3 package so that the
desired diode cathode is
inserted here.
This socket and spring
pin provide mechanical
support only. They are
not electrically active.
For TO-3 packages
with Case = Anode
This spring pin must
contact the underside of
the case. It provides the
cathode connection.
The anode pin of
interest must be inserted
into this socket. For dual-
diode devices, rotate the
TO-3 package so that the
desired diode anode is
inserted here.
This socket and spring
pin provide mechanical
support only. They are
not electrically active.
For TO-3 packages
with Case = Cathode
32
Summary of Contents for 14260
