Avtech 14260, Instructions Manual, Page: 9 / 54

SPECIFICATIONS – INCLUDED TEST JIGS
Option Included Jig Typical Parasitic Inductance 1 , Maximum Current, Description
Preferred Jigs
-MIX
(or no option
specified)
AVX-TFR-MIX 7 nH, 1A Standard on AVR-EBF6-B, AVR-EBF8-B. Includes a mix of pin sockets. Will accept
TO-220AC (2 lead) packages, DO-style packages 3 (DO-15, DO-35, DO-41, DO-
201AD, etc.) with leads bent at 90°, and standard and reverse-polarity TO-3
packages. Lead bending is required for axial packages.
-HPOST AVX-TFR-HPOST 7 nH, 10A Standard on AVR-EBF10-B. High-current (up to 10A) jig for DO-41 packages (0.205"
x 0.107" body, max) and Microsemi Axial Type E packages (0.185" x 0.135" body,
max). Unlike the standard jig, bending is NOT required to insert these packages.
This jig will not accept any other type of package.
-SOD123 AVX-CA-SOD123 7 nH, 1A Accepts SOD123 packages. A clamp presses the DUT down against upwards-facing
spring pins.
-SOD123W AVX-CA-SOD123W 7 nH, 1A Accepts SOD123W packages. A clamp presses the DUT down against upwards-
facing spring pins.
-SOD128 AVX-CA-SOD128 7 nH, 1A Accepts SOD128 packages. A clamp presses the DUT down against upwards-facing
spring pins.
-SQMELF AVX-TFR-SQMELF 7 nH, 1A Square MELF jig. Accepts Microsemi Type A (D-5A) and Microsemi Type E (D-5B)
“square MELF” packages. It also accepts Microsemi Type B (D-5D) and Microsemi
Type G (D-5C) packages, although the fit is less optimal.
-STUD AVX-TFR-STUD TBD, 1A Stud jig. Accepts DO-4 and DO-5 stud packages.
NOTE: All of the above jigs are suitable for light research and development use. Consult Avtech
( info@avtechpulse.com ) regarding the suitability of particular jigs for heavy production use.
9