Avtech 14260, Instructions Manual, Page: 30 / 54

TEST JIG MECHANICAL ASPECTS
ALL TEST JIGS
The IN, MON, OUT, and CONTROL connectors are on the rear of the jig, below the
hinges:
AVX-TFR-MIX TEST JIG
One AVX-TFR-MIX test jig is normally supplied with the mainframe, unless the
customer has requested a different or additional test jigs.
The AVX-TFR-MIX test jig accepts a range of through-hole and axial devices, using pin
sockets and spring-loaded pins. It is intended for use with diodes in DO-41, TO-220,
DO-204AR, TO-3 or similar packages. A photo of the arrangement is shown below:
30