Warning: Failure to use a grounded outlet may result in injury or death due to
electric shock. This product uses a power cord with a ground connection. It must be
connected to a properly grounded outlet. The instrument chassis is connected to the
ground wire in the power cord.
The table below describes the power cord that is normally supplied with this instrument,
depending on the destination region:
Destination Region
Description
Option
Manufacturer
Part Number
United Kingdom, Hong Kong,
Singapore, Malaysia
BS 1363,
230V, 50 Hz
-AC00
Qualtek
370001-E01
Australia, New Zealand
AS 3112:2000,
230-240V, 50 Hz
-AC01
Qualtek
374003-A01
Continental Europe, Korea,
Indonesia, Russia
European CEE 7/7
“Schuko” 230V, 50 Hz
-AC02
Qualtek
364002-D01
North America, Taiwan
NEMA 5-15,
120V, 60 Hz
-AC03
Qualtek
312007-01
Switzerland
SEV 1011,
230V, 50 Hz
-AC06
Qualtek
378001-E01
South Africa, India
SABS 164-1,
220-250V, 50 Hz
-AC17
Volex
2131H 10 C3
Japan
JIS 8303,
100V, 50-60 Hz
-AC18
Qualtek
397002-01
Israel
SI 32,
220V, 50 Hz
-AC19
Qualtek
398001-01
China
GB 1002-1,
220V, 50 Hz
-AC22
Volex
2137H 10 C3
PROTECTION FROM ELECTRIC SHOCK
Operators of this instrument must be protected from electric shock at all times. The
owner must ensure that operators are prevented access and/or are insulated from
every connection point. In some cases, connections must be exposed to potential
human contact. Operators must be trained to protect themselves from the risk of electric
shock. This instrument is intended for use by qualified personnel who recognize shock
hazards and are familiar with safety precautions required to avoid possibly injury. In
particular, operators should:
1. Keep exposed high-voltage wiring to an absolute minimum.
2. Wherever possible, use shielded connectors and cabling.
3. Connect and disconnect loads and cables only when the instrument is turned off.
14
Summary of Contents for 14260
