It is possible to use a screwdriver to adjust the positioning of the nylon screw. This will
vary the maximum mechanical pressure applied to the DUT. The lever should snap into
place when fully down, with a firm locking effect. It may be necessary to occasionally
adjust this screw.
Once the DUT is installed in the socket, close the main lid. It must be closed for proper
operation.
AVX-TFR-SOD128
The AVX-TFR-SOD128 is mostly identical to the AVX-TFR-SOD123W described
above, except the dimensions of the DUT cavity are slightly different. It accepts
SOD128 packages, rather than SOD123W packages.
35
Summary of Contents for 14260
