AVT MAGIC TH2, Hardware Manual

Page: 66 / 130

PAGE 66
W i n d o w s P C S o f t w a r e
5.6.2 Submenu Presets
Via
Presets
you can load already created configurations.
5.6.2.1 Manage Presets
Your created
Presets
can be managed via the menu
Configuration
→
Pre-
sets
→
Manage Presets
.
FIG. 31 MANAGE PRESETS
All already existing configurations are displayed in the list.
• With the use of the
New
button you create a new configuration. The cur-
rent configuration of the system is not changed or loaded by this function.
First, select an expedient name. The length of the name must not surpass 8
characters. Special characters and space characters are not allowed. Please
mind that you use unique names.
FIG. 32 NEW CONFIGURATION
Subsequently, the configuration dialogue is opened for the editing of the
Presets
. The current configuration is always displayed as basis of a
Pre-
set
which you can adjust according to your wishes. The following config-
urations can be saved as Preset:
– Line Interface (see Page 41)
– Signal Processing (see Page 44)
– HOLD Signal (see Page 47)
– Audio Monitoring (see Page 49)
– Equalizer (see Page 51)