AVT MAGIC TH2, Hardware Manual

Page: 31 / 130

PAGE 31
O p e r a t i o n v i a D i s p l a y a n d K e y p a d
To activate a Quick Dial, from the main menu just press the desired Quick
Dial number for at least 3 seconds. The connection to the subscriber is es-
tablished automatically.
4.3.3 Configuration management
The MAGIC TH2 differentiates between
System Settings
and
Operation Set-
tings
.
System Settings are settings, which do not change during normal operation,
like for instance language, date/time etc. These parameters cannot be saved
in a preset since a configuration is usually only required when putting the sys-
tem into operation.
Operation Settings, like for instance the line interface ISDN or POTS, Ring
Tone, Signal Processing etc., must possibly be reconfigured depending on the
respective application. To easily recall recurrent configurations you can store
up to 10 presets in the system.
The
Presets
menu is reached by pressing the
Menu
softkey once and the cur-
sor key twice followed by a confirmation via the
Select
softkey.
In the input field
Presets
you can search for a certain configuration. As soon
as you enter a character, the entries in the Presets list in demand are retrieved.
Alternatively, you can select a configuration from the list via the cursor keys
and .
By pressing the
Ok
button the configuration is loaded immediately.
The following functions, which you can select via the
Select
softkey, are im-
plemented by the
Opts.
(Options) softkey:
–
Load
: The stored configuration is loaded.
–
New
: By the use of this function you create a new configuration. All current
Operation Settings are saved.
–
Save
: The currently selected configuration will be overwritten with the
current Operation Settings. For safety reasons you have to confirm your
selection.
–
Delete Preset
: The currently selected configuration will be deleted. For
safety reasons you have to confirm your selection.
TIP
Just as the configuration menus the phone book functions can also be reached
directly via the QuickBook function. Please press the following key sequence:
Names Opts. <Digit>
Example:
Save as Quick dial
-
Names Opts. 5
NOTICE
If the configuration has changed, you are asked if you want to
Save Settings?
when you leave the configuration menu. Via the
Yes
softkey the setting is
stored permanently in the system. This configuration is loaded automatically
by the system after the connection to the power supply.