AVT MAGIC TH2, Hardware Manual

Page: 28 / 130

PAGE 28
O p e r a t i o n v i a D i s p l a y a n d K e y p a d
4.2 Working with the MAGIC TH2
In the following paragraphs basic functions like initiating a call, dropping a
connection, accepting a call etc. are described in detail.
4.2.1 Call initiation
From the main menu just enter the phone number using the keys
0...9
. After
the first numeral the input field for the phone number is displayed automati-
cally.
Via the
Delete
softkey misentries can be corrected.
With the use of the cursor keys and the Audio line
ON AIR
,
HOLD
and -
if configured (see CHAPTER 4.1.4, Page 26) -
PRETALK
can be selected. As soon
as the subscriber accepts the call, the incoming signal is displayed by the se-
lected Audio line respectively the corresponding input is activated.
After entering the number the connection is established by pressing the tele-
phone receiver button .
Via the
Opts.
(Options) softkey the dialled number can be saved in the phone
book (see CHAPTER 4.3.1, Page 30) or stored as Quick dial number (see
CHAPTER 4.3.2, Page 30).
4.2.2 Status display - Operation during a connection
After pressing the telephone receiver button the subscriber is called and the
status window is displayed.
In the ISDN operating mode the displayed window is split in two - one for
each available B channel.
If the ISDN Single Hybrid operating mode or the POTS operating mode is
used, only one channel is visible respectively.
An outgoing call is signalised by
Call Out...
. The dialled number (respectively
the name if a phone book entry is selected) is displayed in the top line.
If the connection has been established, the level indication for the incoming
signal (
R
eceive) and the outgoing signal (
T
ransmit) is displayed.
NOTICE
If you are not in the main menu, please press the key first.
From the main menu you reach the status window via the
Ok
button.
NOTICE
The Default Audio Line, which is automatically set after the connection is
dropped, can only be configured via the PC software (see CHAPTER 5.6.1.1,
Page 41).
NOTICE
In the POTS operating mode the number respectively the name is displayed
only for outgoing calls. The CLIP
a
function is not supported by analogue te-
lephone lines.
a CLIP = Calling Line Identification Presentation
current level for the incoming signal