AVT MAGIC TH2, Hardware Manual

Page: 36 / 130

PAGE 36
W i n d o w s P C S o f t w a r e
5.4.1 Operating elements
5.4.1.1 Info key
On the
INFO
button the information about the caller is shown. If transmitted
the phone number of the caller is displayed. If additionally a phone book en-
try is available, the number and the caller’s name are displayed.
By pressing the
INFO
key the
phone book
(see CHAPTER 5.4.1.7) is opened
and the entry can be edited immediately or it is possible to preselect a caller
to the selected line. If a preselection is available you must press only one of
the buttons
PRETALK, HOLD
or
ON AIR
to initiate a call. To delete a presel-
ection press the
CLEAR
button (see Fig. 9).
5.4.1.2 Status keys: PRETALK (EXT. PHONE), HOLD, ON AIR, DROP
Via the keys
PRETALK
,
HOLD
,
ON AIR
and
DROP
the line status is selected.
The button
PRETALK
switches the caller in Pre Talk. This button is only dis-
played if in the configuration
Configuration
→
Basic Settings
→
General
→
Pretalk Interface
the option
Handset/Headset
is selected
If the option
External Phone
is selected, the button
EXT. PHONE
is displayed
instead of the
PRETALK
key. Initially, it cannot be used. When the analogue
telephone is picked up, the key colour changes to green. Now, the button can
be used and it is possible to switch between
HOLD
,
ON AIR
and the external
telephone anytime during an established connection.
Via the
HOLD
key the caller is hold on line. The caller hears the Audio signal
which is transmitted via the Audio input.
Instead of the program an Audio sequence stored previously in the system
(
Recorded Hold Signal
) can be displayed ((see CHAPTER 5.6.1.1.3).
By pressing the button
ON AIR
the caller is connected through via the corre-
sponding Audio output.
Via the
DROP
key the connection to the caller can be dropped.If no connec-
tion exists the line is locked by pressing the key
DROP
a second time (
LOCK
).
In this case the caller hears the Busy signal. The line is unlocked by pressing
the key again. Outgoing calls are still possible in the locked status.
When there is an incoming call, all keys are displayed in yellow and blinking.
Respectively, each of these keys can be selected. In this way, you can switch a
caller directly
ON AIR
for instance.
In contrast to this, when there is an outgoing call, the keys
PRETALK
,
HOLD
and
ON AIR
are displayed yellow and static whereas the key
DROP
is dis-
played yellow and blinking. Only the
DROP
button can be selected.
ATTENTION If the telephone receiver is dropped while the caller is
HOLD
or
ON AIR
the
caller cannot be switched back to the phone.
If the telephone receiver is dropped and you press the button
EXT. PHONE
,
the connection is dropped.
NOTICE The locking of Audio lines is only available in the operating modes
ISDN
or
ISDN Single Hybrid
(see CHAPTER 5.6.1.1.1).
!