AVT MAGIC TH2, Hardware Manual

Page: 47 / 130

PAGE 47
W i n d o w s P C S o f t w a r e
5.6.1.1.3 HOLD Signal
The configuration of the
HOLD
signal can be carried out under
Hold Signal
.
FIG. 17 RECORDED HOLD SIGNAL
General settings
• Under the setting
HOLD signal source
you can select the
HOLD
signal
that you want to use.
With the option
ON AIR
the signal which is transmitted via the AUDIO 1
respectively AUDIO 2 input interface is used as
HOLD
signal. In this set-
ting no further options can be configured.
If you select
Recorded Hold Signal
, the caller hears the Audio signal
stored in the system. The signal is identical for both lines (in ISDN operat-
ing mode).
• With the use of the slide control
Pause between repetition
you can set the
pause between the repetitions of the recorded signal. The pause time
ranges from
0 to 30 Seconds
.
HOLD signal recording
• To record a
HOLD
signal you can select the line on which the signal is re-
corded under
Record source
. The options are:
Audio 1
,
Audio 2
or
Hand-
set/Headset
.
• Via the button
Start
you start the recording. With
Stop
the recording is
stopped. With
Save
the recorded signal is saved in the permanent mem-
ory (FLASH-EPROM) of the system.
• The duration of the
HOLD
signal is displayed under
HOLD signal dura-
tion
. The maximum duration of a recorded signal is 6,383 seconds.