AVT MAGIC TH2, Hardware Manual

Page: 86 / 130

PAGE 86
O p t i o n : M A G I C T H 2 K e y p a d
6.2 Keypad Functions
Below you will find the keypad functions listed in table form.
TAB. 3 KEYPAD FUNCTIONS
Function key Description
After pressing the key the last cypher of an entry is deleted.
Partly, this key is used to terminate an operation.
By pressing this key you can delete the entire entry.
Via the keys 0...9 it is possible to enter a phone number. The
connection is established by pressing the button PRETALK,
HOLD or ON AIR of the respective channel.
The keys ’*’ and ’#’ are mostly used for special functions in con-
nection with a private branch exchange.
By pressing the Quick Dial keys QD 0 ... QD 4 a prepro-
grammed number is dialled immediately. The storage of the
telephone number can be carried out via the PC Software (see
CHAPTER , Page 34) or via the Keypad itself.
The shift to the second level is carried out by the SHIFT key.
Programming of a Quick Dial key:
- Entering the phone number
- Pressing SHIFT + 3
- Selecting the desired Quick Dial key
The SHIFT key allows a shifting to the 2. Quick Dial Keys level.
If the SHIFT key is pressed the character ’^’ is displayed in the
upper right corner.
Additionally, the following special function are programmed:
SHIFT + 1: Activating/Deactivating the sending of DTMF
tones in channel 1
a
SHIFT + 2: Activating/Deactivating the sending of DTMF
tones in channel 2
SHIFT + 3: Programming of the Quick Dial keys
SHIFT + 4: not used
SHIFT + 5: Display of the software version
SHIFT + 6: Shift display of phone number (name)/
display of level meter
Via these two keys you can scroll 5 entries upwards respec-
tively downwards in the phone book.
Via these two keys you can scroll 1 entry upwards respectively
downwards in the phone book.
This button drops the connection of the respective channel.
There is no request for confirmation.
If no connection exists the line can be locked by pressing the
key. Now the status LOCKED is displayed. The line is unlok-
ked by pressing the key a second time. This function is only
available in the ISDN operating mode.
C
AC
0 9
* #
QD
0/5
QD
4/9
SHIFT
1
Î
D I S C O N . 2
Î
D I S C O N . ^
0 3 0 1 2 3 4 5 6 7 8
ÃÃ
ÄÄ
Ã
Ä
DROP
HYBRID 1/2