AVT MAGIC TH2, Hardware Manual

Page: 55 / 130

PAGE 55
W i n d o w s P C S o f t w a r e
can be adjusted separately for the input (
Level In
) and for the output
(
Level Out
) in the range of
-3 ... +9 dBu
in 1-dB steps. The head room is 6
dB in general. If you want to have the maximum level of 15 dBu for the sys-
tem, you must set 9 dBu as nominal level. The default settings are 0 dBu.
• If you configured the
PRETALK
interface for a
Handset/Headset
(see
Page 52, Pretalk Interface), two slide controls for the Audio level adjust-
ment are displayed. Under
Handset Nominal Level
you can set the Audio
level separately for the input (
Level In
) in the range of
-24 ... +6 dBu
and
for the output (
Level Out
) in the range of
-6 ... +6 dBu
in 1-dB steps. The
defaults settings are 0 dBu.
• Via the slide control
Audio Level Offset
it is possible to increase or de-
crease digitally the caller signal level in a range from
-16 ... +15 dB
.
• To set all parameters to default values press the
Default Settings
button.
HINWEIS Please change this setting only if you have problems with your level adapta-
tion