Avocent HMX 1050, Installer/User Manual

Page: 99 / 100

USA Notification
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Canadian Notification
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le Ministère des Communi-
cations du Canada.
Japanese Approvals
Safety and EMC Approvals and Markings
UL, FCC, cUL, VCCI, CE, C-TickSafety certifications and EMC certifications for this product are obtained under one or more of
the following designations: CMN (Certification Model Number), MPN (Manufacturer’s Part Number) or Sales Level Model des-
ignation. The designation that is referenced in the EMC and/or safety reports and certificates are printed on the label applied to
this product.European Union NotificationWarning: This is a class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate measures.