Avocent HMX 1050 Installer/User Manual Download Page 11

Page: 11 / 100

Chapter 1: Product Overview

Bandwidth usage (HMX 1050 user station only)

It is possible to restrict the aggregate bandwidth used on the Ethernet link from the serial console.
The bandwidth options are:

•

Unlimited

•

100 MBits/s

•

50 MBits/s

•

20 MBits/s

•

10 MBits/s

User station modes

The HMX system can operate in Extender Mode, Desktop Mode, Matrix Mode or Share Mode. The
HMX user station and transmitter can obtain their IP address data from a DHCP server in any of the
three modes.

Extender Mode

In Extender Mode, turning on the HMX user station automatically establishes a connection with the
remote workstation via the transmitter.

Desktop Mode

In Desktop Mode, turning on the HMX user station enables the user to log in and connect to their
allocated computer.

Matrix Mode

In Matrix Mode, turning on the HMX user station enables the user to log in and view all accessible
computers.

Share Mode

In Share Mode, multiple users can connnect to the audio and video of a target computer over the
network and arbitrate for control of that computer.

Summary of Contents for HMX 1050





































































































Search results

Summary of Contents for HMX 1050

Reviews:

Related manuals for HMX 1050

Brands by name

Popular brands

Avocent HMX 1050, Installer/User Manual

Search results

Summary of Contents for HMX 1050

Reviews:

Related manuals for HMX 1050

Brands by name

Popular brands